I would like to run my inmoov head using a UNO bd. and can not figure out how to redefine the pins. Currently the pins are setup for the Mega bd. and are head/neck =12, head/rotate=13, eyeX=22, eyeY=24, mouth/jaw=26. They all need to be reassigned to fit lower pins on the UNO bd. I have tried several things but can not figure it out.
thanks!
Try
Try this..
[[home/harland/uno.py]]
thanks for the help
thanks!
It was just what I needed. I tried it and all is good.
John