AdolphSmith's blog

Need help with new dlp printer firmware

AdolphSmith's picture

I need help to make new firmware for DLP Resin printer. I do not need a Ramps controller as the printer have only one axis and the DLP projector is controlled by cretion Workshop program .

So eat i have and what i use is:

1. Ardiuno R3

2. A4988 stepper driver

3. Nema 17 stepper Steps per revolution 200 1.8deg/step (My Z=2560)

4. Lead screw for 7 axis is 8mm x 250mm ( Standard prosa Mendal ) 


Silicone RTV155 Finger for use in robots

AdolphSmith's picture

I have made masks so i tri finger and put string in to see if it work and it do.

 


INMOOV LOWER LOWER AND MIDDLE TORSO WITH STEPPER

AdolphSmith's picture

i ONLY USE ONE STEPPER MOTOR FOR tILT LEFT AND RIGHT AND ONE STEPPER MOTOR FOR TURN LOWER LOWER TORSO AND BUILDT IN PLANETARY GEARS